1. Insert one end of leader material through eye of hook and bring it past the turn and barb. Pass other end through eye in opposite direction, leaving a large loop hanging down.

2. Holding both lines along the shank, wind tight coils around shank and both lines hanging from the eye, moving from eye toward hook. make 5 to 10 turns.

3 .Move fingers to hold coil tightly in place. pull leader extending from eye until entire loop has passed under coil.

4. With coil snug neatly, use pliers to pull tag end, clinching the snell.

5. Clip off end and tie loop knot in end of leader.

Surgeon's End Loop

Use this knot to tie in the end of a line for attaching leaders or other terminal tackle quickly	1. Double end of the line to form a loop, then tie an overhand knot at the base of the double line
2. Leaving the loop open, bring the double line through once more		3. Hold the standing line and tag end, and pull loop to tighten knot. You can adjust the loop size by shifting the loose knot before tightening
	4. Clip tag end.

Here are some more tips from Missouri Fishing!